Hottest Yokogawa motor tdls8200 probe type tunable

2022-09-19
  • Detail

Yokogawa electric tdls8200 probe type tunable diode laser spectrometer will be launched soon

provide excess air when controlling combustion in the heating furnace, which will absorb the heat in the furnace before it is discharged through the chimney. In addition to causing heat loss, it will also produce a large number of nitrogen oxides and sulfur oxides, resulting in air pollution. On the other hand, if the air supply is insufficient, incomplete combustion will occur, resulting in the supply of excessive air when controlling combustion in the heating furnace, which will absorb the heat in the furnace before being discharged through the chimney. In addition to causing heat loss, it will also produce a large number of nitrogen oxides and sulfur oxides, resulting in air pollution. On the other hand, if the air supply is insufficient, incomplete combustion will occur, resulting in energy loss, carbon monoxide and black smoke emissions, and residual methane. Carbon monoxide and methane are combustible gases. If they accumulate in the furnace, they are easy to form explosive mixtures with air

therefore, oil and gas, petrochemical, electric power, steel and ceramics plants need to monitor the concentration of oxygen, carbon monoxide and methane in the furnace to control and ensure an efficient, environmental friendly and safe combustion process

recently, Yokogawa electric announced to add a new product to the product lineup of oprex Analyzer Series: tdls8200 probe type tunable diode laser spectrometer, which is scheduled to go on sale on May 6. Tdls8200 has the same advantages as tdls8100: low installation cost, high stability and high reliability. At the same time, it can directly and quickly measure the concentration of oxygen, carbon monoxide and methane at the same time. In addition to the ability to measure three different gas types at the same time, tdls8200 will be further upgraded this year. The upgraded product can be measured in an environment with a temperature of up to 850 ℃. While maintaining stability, measure and restart the lower jaw electromechanical conditioning lower jaw to measure the oxygen, carbon monoxide and methane in the factory boilers and heating furnaces, so as to promote effective combustion control and safe operation

it has the following characteristics:

1. It can ensure efficient combustion and safety by measuring oxygen, carbon monoxide and methane at the same time.

tdls8200's most remarkable feature is its dual laser light source and optical elements, which can measure the concentration of oxygen, carbon monoxide and methane at the same time and control combustion. Its direct measurement system depends on the use of laser, which is easier to maintain than the traditional sampling system and more reliable than the sensor using catalyst. This ensures stability and nondestructive measurement of oxygen and carbon monoxide concentrations

2. Simply replace the sampling system

tdls8200 is a probe type product that is easy to install. The existing sampling point can be simply shared by technicians, or the probe can be interchanged with tdls8200, and the product can also be installed on the interface of the previous instrument. Since there is no need to install additional sampling equipment, the space occupied by tdls8200 is very small

3. It is planned to release an enhanced version, which will be able to measure in the environment where the energy and environment development strategy is formulated with a temperature of up to 850 ℃

the tdls8200 scheduled to be released on May 6 can withstand a high temperature of 600 ℃, and can be used in boiler, exhaust pipe and other applications. The enhanced version of tdls8200 will be released this year, which can be measured at temperatures up to 850 ℃, thus expanding the application of heating furnaces and other fields

data shows that Yokogawa was founded in 1915 and engaged in a wide range of activities in the fields of measurement, control and information. Its industrial automation business provides important products, services and solutions for various process industries, including petroleum, chemical, natural gas, electricity, steel, pulp and paper

Copyright © 2011 JIN SHI